WIKA Denmark
  1. Products
  2. SF6 gas products
  3. Service equipment

Service equipment

Service equipment for installations and corrective maintenance

Filling and handling equipment for SF6 gas are the central tools for the maintenance of gas-insulated equipment. For both installation and maintenance, WIKA supplies the complete product spectrum of efficient service equipment, starting from simple filling carts up to complex, fully automated all-in-one solutions. Furthermore, the instruments support the plant operator with the recording of the SF6 gas volumes and emissions, as is prescribed in the F-gas regulation (EU), No. 517/2014, for specified equipment.

FAQ
FAQ

What can be filled with a portable SF6 transfer unit?

Due to the maximum output pressure of 50 bar abs., you can use the portable SF6 transfer unit both for filling gas cylinders and other vessels. At this pressure, the SF6 gas has already passed into the liquid phase, thus enabling space-saving stora ...

more

What is the difference between a vacuum pump and vacuum compressor?

A vacuum pump is used to evacuate a gas compartment from air. In contrast, a vacuum compressor in the SF6 recovery process ensures an initial pressure of greater than 1 bar at the SF6 compressor and thus enables a residual pressure in the gas tank ...

more