WIKA
  1. Products
  2. SF6 gas solutions
  3. Service equipment

Service equipment

Service equipment for installations and corrective maintenance

Filling and handling equipment for SF6 gas are the central tools for the maintenance of gas-insulated equipment. For both installation and maintenance, WIKA supplies the complete product spectrum of efficient service equipment, starting from simple filling carts up to complex, fully automated all-in-one solutions. Furthermore, the instruments support the plant operator with the recording of the SF6 gas volumes and emissions, as is prescribed in the F-gas regulation (EU), No. 517/2014, for specified equipment.

FAQ
FAQ

Which service tasks can be performed with handling equipment?

The gas handling equipment is an SF6 handling unit, which can be used to recover and fill SF6 gas compartments as well as to filter the extracted gas. Commissioning of SF6 gas cylinders is also no problem with the gas handling equipment.

What is the difference between a vacuum pump and vacuum compressor?

A vacuum pump is used to evacuate a gas compartment from air. In contrast, a vacuum compressor in the SF6 recovery process ensures an initial pressure of greater than 1 bar at the SF6 compressor and thus enables a residual pressure in the gas tank of ...

more