WIKA
  1. Products
  2. SF6 gas solutions
  3. Service equipment

Service equipment

Service equipment for installations and corrective maintenance

Filling and handling equipment for SF6 gas are the central tools for the maintenance of gas-insulated equipment. For both installation and maintenance, WIKA supplies the complete product spectrum of efficient service equipment, starting from simple filling carts up to complex, fully automated all-in-one solutions. Furthermore, the instruments support the plant operator with the recording of the SF6 gas volumes and emissions, as is prescribed in the F-gas regulation (EU), No. 517/2014, for specified equipment.

FAQ
FAQ

Is it possible to dispense with a pre-filter when recovering SF6 gas with handling equipment?

Although two filter systems are installed in the WIKA handling equipment (particle filter and SF6 filter), in the event of heavily contaminated SF6, a pre-filter (e. g. GPF-10) should be used to protect the system.

Which service tasks can be performed with handling equipment?

The gas handling equipment is an SF6 handling unit, which can be used to recover and fill SF6 gas compartments as well as to filter the extracted gas. Commissioning of SF6 gas cylinders is also no problem with the gas handling equipment.