Temperature transmitters convert the temperature-dependent change in resistance of resistance thermometers or the temperature-dependent change in voltage of thermocouples into a standardised output signal (e.g. 0 ... 10 V or 4 ... 20 mA). With these standardised signals, measured temperature values can be transmitted easily and reliably.
Until the introduction of the temperature transmitter, the raw measured values of the sensor were only transmitted to the control room via cable and then converted and processed there. These days, this form of transfer is only used in specific cases, for example, if the ambient temperature is too high or the installation situation is too restricted. For tasks of this type, rail-mounted transmitters also offer a solution. In almost all standard applications, however, head-mounted transmitters have prevailed.
With the help of a temperature transmitter, not only can users collect measured values digitally via fieldbuses or different protocols, such as HART® or company-specific systems that work parallel to the 4...20 mA output loop, but they can also completely configure the instruments. The relevant elements here are, primarily, the selection of sensor input and measuring range, the storage of measuring location identifiers such as TAG numbers and M&C descriptions as well as the adjustment of the measuring signal by an offset or a specific characteristic curve of the sensor.
A further feature of the modern temperature transmitter is the diagnostic functionality: The instrument not only measures the value from the sensor and converts it into the desired temperature unit, it also checks many relevant parameters in the background, e.g. lead resistances, the internal electronics temperature and the supply voltage. If errors occur, the temperature transmitter immediately sends a corresponding signal. In this way, errors such as sensor breaks and short-circuits, effects of the lead and, when using dual sensors, even the drift of a measured value can be detected.
What is galvanic isolation?
An isolation of the signal between the signal side and the output side (e.g. through coils).
What are the special features of the T32 SIL transmitter?
It has had a FMEDA analysis carried out on it. The T32 has been developed in accordance with IEC 61508 and has been manufactured accordingly. The T32 operates exclusively with active write protection.