- Hardness testing on thermowells to prove their NACE hardness values
TW10-P, TW10-B, TW10-S, TW30, TW31, TW10, TW15, TW20, TW25
- Wear-resistant coatings of thermowells
TW10-P, TW10-B, TW10-S, TW30, TW31, TW10, TW15, TW20, TW25
- Performance of the primary-standard resistance thermometry bridge model CTR9000 (F900)
CTR9000
- Connecting Flanges for Diaphragm Pressure Gauges
PGT43HP.100, PGT43HP.160, PGT43.100, PGT43.160, APGT43.100, APGT43.160, 532.53+8xx, 532.52, 532.53, 532.54, 432.50, 433.50, 432.36+8xx, 432.56+8xx, 432.56, 432.36, 422.12, 423.12
- Callendar-Van Dusen equations for the calibration of platinum resistance thermometers
TR11-A, TR34, CTP5000, TR10-K, TR33, TR10-C, TR12-A, TR12-B, TR12-M, TR22-B, TR22-A, TR21-C, TR21-B, TR21-A, TR31, TR81, TR10-D, TR95, CTP2000, CTP9000, TR75, TR60, TR55, TR53, TR50, TR40, TR30, TR25, TR20, TR10-L, TR10-J, TR10-H, TR10-F, TR10-B, TR10-A
- Inserts for temperature dry-well calibrators
CTD4000
- Diaphragm seal systems for vacuum processes
UPT-20, UPT-21, DPT-10, 990.60, 990.51, 990.50, 990.41, 990.40, 990.36, 990.35, 990.34, 990.31, 990.29, 990.28, 990.27, 990.26, 990.24, 990.23, 990.22, 990.52, 990.53, 990.18, 990.19, 990.20, 990.21, 990.17, 990.15, 990.12, 990.10, 981.51, 981.50, 981.27, 981.22, 981.52, 981.53, 981.18, 981.19, 981.20, 981.21, 981.10, IPT-10, IPT-11, 990.38
- How to improve the total uncertainty of the calibration with a temperature dry-well calibrator (industrial applications)
CTD9100-375, CTM9100-150, CTD9100-1100, CTD9300, CTD9100-ZERO, CTD9100, CTD4000
- Application of thermocouples
TC96-M, T16, TC84, TC96-R, CTP2000, CTP9000, TC12-A, TC10-L, TC12-B, TC12-M, TC47-MB, TC47-NT, TC47-UB, TC47-RL, TC47-FB, TC47-AC, TC47-MT, TC47-AB, TC80, TC46, TC90, TC81, TC95, TC10-K, TC59-V, TC53, TC50, TC40, TC10-H, TC10-F, TC10-D, TC10-C, TC10-B, TC10-A, TC97, TC94, TC59-T, TR96-O, TC96-O, TC59-R, TC59-X, TC59-W
- Temperature sensors, connection designs and thermowells for mechanical and mechatronic expansion thermometers
STW15, 70-8xx, TGT70, TF58, TF59, SC15, IFC, 70, SB15, SW15
- General information about NACE standards for sour gas applications with WIKA products
CPT-20, CPT-21, IPT-20, IPT-21, TW10-P, TW10, TW10-B, TW10-S, UPT-20, UPT-21, E-10, E-11, 732.14, 762.14, IS-10, IS-11, TW15, TW20, TW25, TW30, TW50, TW55, 990.38, IPT-10, IPT-11, DPT-10, 232.50, 233.50, TR60, 232.30, 233.30, 981.10, 981.27, 990.10, 990.15, 990.28, 990.34, PGT43.100, PGT43.160, 232.36, 233.36, 990.36, 990.40, 990.26, 990.12, 990.41, 990.29, 990.35, 990.27, PG23CP, PG23LT
- Mechanical temperature measuring instruments
TGS73, A43, A50, A48, A46, TGT73, 73, 70-8xx, TGS55, 53, 54, TF58, TF59, SB15, SW15, SC15, IFC, 74-8xx, 74, 75, 32, TGT70, TG53, TG54, A52, R52, 55, 70
- Pressure connections per EN 837
612.34, 632.34, 633.34, IS-10, IS-11, PGT10 USB, 111.11, DPG40, 910.25, 910.80, IPT-10, IPT-11, 732.18, 733.18, 111.31, PGT21, 111.16, 111.26, 232.50, 233.50, 212.20, 712.15.100, 732.15.100, PGS21, PGS25, 910.16, 716.05, 716.11, 736.11, 910.10, 910.11, 910.12, 910.13, 910.15, 910.17, 910.18, 910.22, DPGT43.100, DPGT43.160, DPGT43HP.100, DPGT43HP.160, PGT23.063, PGT23.100, PGT23.160, PGT43.100, PGT43.160, PGT43HP.100, PGT43HP.160, 712.15.160, 732.15.160, 232.30, 233.30, 232.34, 233.34, 232.36, 233.36, 732.31, 732.51, 732.14, 762.14, DPGS43.100, DPGS43.160, DPGS43HP.100, DPGS43HP.160, 910.14, 312.20, 332.30, 333.30, 332.50, 333.50, 342.11, 422.12, 423.12, 432.36+8xx, 432.56+8xx, 111.10, 111.12, UPT-20, UPT-21, DPGT40, DPGS40TA, 432.50, 433.50, 532.53+8xx, 610.20, 630.20, 611.10, 631.10, 611.13, 632.50, 633.50, 632.51, 700.01, 700.02, 711.12, 713.12, 731.12, 733.02, PG23CP, PG23LT, PG23HP-P, PG23HP-S, DPGS40, DPS40, 111.12.040, 612.20, 131.11, PGS21.100, PGS21.160, PGS23.063, PGS23.100, PGS23.160, 432.56, 432.36, 532.52, 532.53, 532.54, 632.51+8xx
- Mounting arrangements, instrument hook-ups for the process industry
612.34, 632.34, 633.34, IV30, IV31, IV50, IV51, IV10, IV11, IV20, IV21, 111.10, 111.12, DPGS40TA, DPGT40, DPS40, DPGS40, DPG40, PGT10 USB, 111.11, PGT21, 712.15.100, 732.15.100, 111.31, 732.18, 733.18, PG43SA-C, PGS25, PGS21, PGT43HP.100, PGT43HP.160, PGT23.100, PGT23.160, PGT23.063, DPGT43HP.100, DPGT43HP.160, DPGT43.100, DPGT43.160, 910.22, 910.18, 910.17, 910.16, 910.15, 910.14, 910.13, 910.12, 910.11, 910.10, DPGS43HP.100, DPGS43HP.160, DPGS43.100, DPGS43.160, 732.31, 732.51, 712.15.160, 732.15.160, 700.01, 700.02, 632.51+8xx, 632.51, 632.50, 633.50, 612.20, 611.13, 611.10, 631.10, 610.20, 630.20, 910.80, 910.25, HPNV, 111.16, 111.26, 232.50, 233.50, 212.20, 716.05, 716.11, 736.11, APGT43.100, APGT43.160, PGT43.100, PGT43.160, 232.30, 233.30, 232.34, 233.34, 232.36, 233.36, 732.14, 762.14, 312.20, 332.30, 333.30, 332.50, 333.50, 342.11, 422.12, 423.12, 432.36+8xx, 432.56+8xx, 432.50, 433.50, 532.53+8xx, PG23CP, PG23LT, 711.12, 713.12, 731.12, 733.02, 131.11, PGS21.100, PGS21.160, PGS23.063, PGS23.100, PGS23.160, 432.56, 432.36, 532.52, 532.53, 532.54
- Specifications of oil and grease free instruments
A-1200
- WIKA standard documentation
TGS73, TGS55, 612.34, 632.34, 633.34, TG54, TG53, 74-8xx, 75, 74, 55, A52, R52, 54, 53, TGT73, 73, IPT-10, IPT-11, 113.53, 213.53, DPT-10, 113.13, 232.50, 233.50, 212.20, 213.40, PGS21, DPGT43.100, DPGT43.160, DPGT43HP.100, DPGT43HP.160, PGT23.063, PGT23.100, PGT23.160, 232.30, 233.30, 232.34, 233.34, 232.36, 233.36, 732.31, 732.51, 732.14, 762.14, DPGS43.100, DPGS43.160, DPGS43HP.100, DPGS43HP.160, 432.50, 433.50, UPT-20, UPT-21, 632.50, 633.50, 112.28, 132.28, PG23CP, PG23LT, PG23HP-P, PG23HP-S, PG21HD, 131.11, PGS21.100, PGS21.160, PGS23.063, PGS23.100, PGS23.160, 532.52, 532.53, 532.54
- Wake frequency calculation
TGS73, TW10-P, TW10, TW55, TW10-B, TW10-S, 73, TW15, TW20, TW25, TW30, TW35, TW40-8, TW40-9, TW40-D, TW40-E, TW45, TW50, TGS55, 53, 54, TW60, TW22, 74-8xx, 74, 75, TW61, TG53, TG54, A52, R52, 55
- Conversion Table of commonly used pressure units
612.34, 632.34, 633.34, DW03UN, CPB3800HP, CPB3500, CPH6300, CPB5800, CPB3800, CPB5000HP, WU-20, WU-25, WU-26, CPT6100, CPT6180, A2G-200, A2G-45, WUC-10, WUC-15, WUC-16, PXS, PXA, PGT43HP.100, PGT43HP.160, PCS, PCA, MW, MA, DW, DW10, DE, DEC, DC, DCC, DA, DA10, CPT2500, CPH6400, CPH62I0, CPH6200, CPT6200, CPH6000, CPT6000, CPG2500, CPC8000-H, CPC8000, CPC2000, CPB5000, BWX, BA, BAX, APW, APW10, APA, APA10, 432.25.2, IS-10, IS-11, CPB5000DP, CPH65I0, CPH7600, PGT23.063UHP, WUR-1, CPC2090, A-AS-1, PGT10 USB, A2G-30, A2G-100, 100.0x, 100.1x, 111.11, DPG40, A2G-50, 113.53, 910.25, IPT-10, IPT-11, PSM01, 213.53, 732.18, 733.18, A2G-90, A2G-55, 111.31, PGT21, DPT-10, iWU-20, iWU-25, iWU-26, PSM02, 111.16, 111.26, 113.13, 232.50, 233.50, 212.20, 213.40, 712.15.100, 732.15.100, PGS21, PGS25, PG43SA-C, A2G-10, A2G-15, 230.15, 230.15-851, CPC6050, 716.05, 716.11, 736.11, APGT43.100, APGT43.160, DPGT43.100, DPGT43.160, DPGT43HP.100, DPGT43HP.160, PGT23.063, PGT23.100, PGT23.160, PGT43.100, PGT43.160, 712.15.160, 732.15.160, 232.30, 233.30, 232.34, 233.34, 232.36, 233.36, CPG500, 732.31, 732.51, 732.14, 762.14, DPGS43.100, DPGS43.160, DPGS43HP.100, DPGS43HP.160, 312.20, 332.30, 333.30, 332.50, 333.50, 342.11, 422.12, 423.12, 432.36+8xx, 432.56+8xx, 432.50, 433.50, PG43SA-D, 111.10, 111.12, A2G-52, PG43SA-S, UPT-20, UPT-21, PSM04, PSM05, PSM06, THM10, DPGT40, DPGS40TA, 532.53+8xx, 610.20, 630.20, 611.10, 631.10, 611.13, 632.50, 633.50, 632.51, 700.01, 700.02, 711.12, 713.12, 731.12, 733.02, A2G-05, A2G-40, 112.28, 132.28, PG23CP, PG23LT, PG23HP-P, PG23HP-S, PSM03, DPGS40, DPS40, 111.12.040, PG21HD, 612.20, 131.11, PGS21.100, PGS21.160, PGS23.063, PGS23.100, PGS23.160, 432.56, 432.36, 532.52, 532.53, 532.54, 632.51+8xx
- Instrument mounting Mounting flanges, panel cutouts
612.34, 632.34, 633.34, 73, TGT73, PGT10 USB, 111.11, 70-8xx, 732.18, 733.18, 111.31, PGT21, 111.16, 111.26, 232.50, 233.50, 212.20, 712.15.100, 732.15.100, PGS21, PGS25, 716.05, 716.11, 736.11, DPGT43HP.100, DPGT43HP.160, PGT23.063, PGT23.100, PGT23.160, 712.15.160, 732.15.160, 232.30, 233.30, 232.34, 233.34, 232.36, 233.36, 732.14, 762.14, DPGS43HP.100, DPGS43HP.160, 312.20, 332.30, 333.30, 332.50, 333.50, 342.11, 111.10, 111.12, 610.20, 630.20, 611.10, 631.10, 611.13, 632.50, 633.50, 700.01, 700.02, TGT70, PG23CP, PG23LT, PG23HP-P, PG23HP-S, 711.12, 713.12, 731.12, 733.02, 111.12.040, 612.20, 131.11, PGS21.100, PGS21.160, PGS23.063, PGS23.100, PGS23.160, 70
- Calibration of AC resistance thermometry bridges traceable to national standards
CTR9000, CTR6500
- Tapped holes for WIKA pressure connections
612.34, 632.34, 633.34, MPR-1, MH-3-HY, MHC-1, O-10, TSD-30, MG-1, P-30, P-31, S-11, R-1, M-10, M-11, LS-10, LH-10, IL-10, HP-2, DG-10, D-20-9, D-21-9, A-10, IS-10, IS-11, A-1200, LSD-30, C-2, MH-1, MH-2, D-10-7, D-11-7, PGT10 USB, MH-4, PSA-31, 111.11, S-20, DPG40, IPT-10, IPT-11, PSD-4-ECO, 113.53, LH-20, 213.53, 732.18, 733.18, 111.31, PGT21, DPT-10, 111.16, 111.26, 113.13, 232.50, 233.50, 212.20, 213.40, 712.15.100, 732.15.100, PGS21, PGS25, PG43SA-C, S-10, PSD-30, PSD-31, 716.05, 716.11, 736.11, 910.17, E-10, E-11, APGT43.100, APGT43.160, DPGT43.100, DPGT43.160, DPGT43HP.100, DPGT43HP.160, PGT23.063, PGT23.100, PGT23.160, PGT43.100, PGT43.160, PGT43HP.100, PGT43HP.160, 712.15.160, 732.15.160, 232.30, 233.30, 232.34, 233.34, 232.36, 233.36, 732.31, 732.51, 732.14, 762.14, DPGS43.100, DPGS43.160, DPGS43HP.100, DPGS43HP.160, 312.20, 332.30, 333.30, 332.50, 333.50, 342.11, 422.12, 423.12, 432.36+8xx, 432.56+8xx, PSD-4, PG43SA-D, 111.10, 111.12, IS-3, PG43SA-S, UPT-20, UPT-21, DPGT40, DPGS40TA, 432.50, 433.50, 532.53+8xx, 610.20, 630.20, 611.10, 631.10, 611.13, 632.50, 633.50, 632.51, 700.01, 700.02, 112.28, 132.28, PG23CP, PG23LT, PG23HP-P, PG23HP-S, DPGS40, DPS40, 711.12, 713.12, 731.12, 733.02, 111.12.040, PG21HD, 612.20, 131.11, PGS21.100, PGS21.160, PGS23.063, PGS23.100, PGS23.160, 432.56, 432.36, 532.52, 532.53, 532.54, 632.51+8xx
- Fixed-point calibration per ITS-90
CTR3000, CTP2000, CTP9000, CTR9000, CTR6000, CTR5000, CTP5000, CTR6500
- Nozzle designs - location of a support collar
- Positive Material Identification test (PMI test)
TW10-P, TW10, TW10-B, TW10-S, TW61, TW22, TW60, TW55, TW45, TW40-D, TW40-E, TW40-8, TW40-9, TW35, TW15, TW20, TW25, TW30, TW50
- Design of thermowells in special lengths
TW55, TW50, TW30, TW25, TW20, TW15, TW10-B, TW10-S, TW10, TW10-P
- Pressure equipment directive 2014/68/EU (PED) in reference to thermowells
STW15, TF37, TW10-P, TW10, TW10-B, TW10-S, TW61, SW15, SB15, TW15, TW20, TW25, TW30, TW35, TW40-8, TW40-9, TW40-D, TW40-E, TW45, TW50, TW55, TW60, TW22
- Elastic element pressure gauges
612.34, 632.34, 633.34, PG21PB, PGT10 USB, 111.11, DPG40, 113.53, 213.53, 732.18, 733.18, 111.31, PGT21, 111.16, 111.26, 113.13, 232.50, 233.50, 212.20, 213.40, 712.15.100, 732.15.100, PGS21, PGS25, PG43SA-C, 716.05, 716.11, 736.11, APGT43.100, APGT43.160, DPGT43.100, DPGT43.160, DPGT43HP.100, DPGT43HP.160, PGT23.063, PGT23.100, PGT23.160, PGT43.100, PGT43.160, PGT43HP.100, PGT43HP.160, 712.15.160, 732.15.160, 232.30, 233.30, 232.34, 233.34, 232.36, 233.36, 732.31, 732.51, 732.14, 762.14, DPGS43.100, DPGS43.160, DPGS43HP.100, DPGS43HP.160, 312.20, 332.30, 333.30, 332.50, 333.50, 342.11, 422.12, 423.12, 432.36+8xx, 432.56+8xx, 432.50, 433.50, PG43SA-D, 111.10, 111.12, PG43SA-S, DPGT40, DPGS40TA, 532.53+8xx, 610.20, 630.20, 611.10, 631.10, 611.13, 632.50, 633.50, 632.51, 700.01, 700.02, PG23CP, PG23LT, PG23HP-P, PG23HP-S, DPGS40, DPS40, 711.12, 713.12, 731.12, 733.02, 111.12.040, PG21HD, 612.20, 131.11, PGS21.100, PGS21.160, PGS23.063, PGS23.100, PGS23.160, 432.56, 432.36, 532.52, 532.53, 532.54, 632.51+8xx
- Scale ranges of pressure gauges, scale mark spacing and numbering of the scale per EN 837
612.34, 632.34, 633.34, THM10, 100.0x, 100.1x, PGT10 USB, 111.11, DPG40, 732.18, 733.18, 111.31, PGT21, 111.16, 111.26, 232.50, 233.50, 212.20, 712.15.100, 732.15.100, PGS21, PGS25, PG43SA-C, 716.05, 716.11, 736.11, DPGT43.100, DPGT43.160, DPGT43HP.100, DPGT43HP.160, PGT23.063, PGT23.100, PGT23.160, PGT43.100, PGT43.160, PGT43HP.100, PGT43HP.160, 712.15.160, 732.15.160, 232.30, 233.30, 232.34, 233.34, 232.36, 233.36, 732.31, 732.51, 732.14, 762.14, DPGS43.100, DPGS43.160, DPGS43HP.100, DPGS43HP.160, 312.20, 332.30, 333.30, 332.50, 333.50, 342.11, 422.12, 423.12, 432.36+8xx, 432.56+8xx, PG43SA-D, 111.10, 111.12, PG43SA-S, DPGT40, DPGS40TA, 432.50, 433.50, 532.53+8xx, 610.20, 630.20, 611.10, 631.10, 611.13, 632.50, 633.50, 632.51, 700.01, 700.02, 711.12, 713.12, 731.12, 733.02, PG23CP, PG23LT, PG23HP-P, PG23HP-S, DPGS40, DPS40, 111.12.040, 612.20, 131.11, PGS21.100, PGS21.160, PGS23.063, PGS23.100, PGS23.160, 432.56, 432.36, 532.52, 532.53, 532.54, 632.51+8xx
- Hydrogen applications with electronic pressure sensors
S-20, E-10, E-11, A-10, IPT-20, IPT-21, IS-3, UPT-20, UPT-21
- Notes on equipment protection per IEC/EN 60529 and NEMA for Bourdon tube or diaphragm pressure gauges
612.34, 632.34, 633.34, PG23HP-S, PG23HP-P, PG43SA-D, STW15, PG43SA-S, A2G-200, A2G-100, A2G-52, UPT-20, UPT-21, PSM06, PSM05, PSM04, PSM03, SC64, SC58, A2G-45, A2G-05, A2G-40, A2G-20, A2G-85, A2G-65, A2G-55, A2G-90, 213.53, 113.53, A2G-25, TF37, A2G-50, A2G-80, A2G-70, A2G-60, A2G-30, A2G-15, A2G-10, IS-10, IS-11, PG21HD, 111.12.040, PGT10 USB, 111.11, 70-8xx, DPG40, IPT-10, IPT-11, PSM01, 732.18, 733.18, 111.31, PGT21, DPT-10, PSM02, 111.16, 111.26, 113.13, 232.50, 233.50, 212.20, 213.40, 712.15.100, 732.15.100, PGS21, PGS25, PG43SA-C, SB15, SW15, SC15, 232.30, 233.30, 716.05, 716.11, 736.11, APGT43.100, APGT43.160, DPGT43.100, DPGT43.160, DPGT43HP.100, DPGT43HP.160, PGT23.063, PGT23.100, PGT23.160, PGT43.100, PGT43.160, PGT43HP.100, PGT43HP.160, IFC, 712.15.160, 732.15.160, 232.34, 233.34, 232.36, 233.36, 732.31, 732.51, 732.14, 762.14, DPGS43.100, DPGS43.160, DPGS43HP.100, DPGS43HP.160, 312.20, 332.30, 333.30, 332.50, 333.50, 342.11, 422.12, 423.12, 432.36+8xx, 432.56+8xx, 432.50, 433.50, 111.10, 111.12, DPGT40, DPGS40TA, 532.53+8xx, 610.20, 630.20, 611.10, 631.10, 611.13, 632.50, 633.50, 632.51, 700.01, 700.02, 112.28, 132.28, TGT70, PG23CP, PG23LT, DPGS40, DPS40, 711.12, 713.12, 731.12, 733.02, 612.20, 131.11, PGS21.100, PGS21.160, PGS23.063, PGS23.100, PGS23.160, 432.56, 432.36, 532.52, 532.53, 532.54, 632.51+8xx, 70
- Operating limits and tolerances of platinum resistance thermometers per DIN EN IEC 60751
TR96-O, TC96-O, TR57-M, TR21-A, TF37, TR11-A, CTP2000, CTP9000, TF41, TF40, TF44, TF43, TR21-B, TR21-C, TR34, TF45, TF35, T91.30, T91.10, T91.20, T53, T24, T12, T15, TR10-K, TR10-C, TR22-B, TR22-A, TR12-B, TR12-M, TR12-A, TR11-H, TR31, TR33, T32.xS, TR10-B, TR25, TR30, TR75, TR81, TR10-D, TR95, TR60, TR55, TR53, TR50, TR40, TR20, TR10-J, TR10-H, TR10-F, TR10-A, TR10-L, CTP5000, TR41, CTP6000
- Welding of WIKA sleeves and welding balls in sanitary applications
TR22-A, TW22, TR21-A, TR21-C
- Selection, installation, handling and operation of pressure gauges
612.34, 632.34, 633.34, PGT10 USB, 111.11, DPG40, 910.25, 910.80, 732.18, 733.18, 111.31, PGT21, 111.16, 111.26, 232.50, 233.50, 212.20, 712.15.100, 732.15.100, PGS21, PGS25, PG43SA-C, 910.16, 716.05, 716.11, 736.11, 910.10, 910.11, 910.12, 910.13, 910.15, 910.17, 910.18, 910.22, APGT43.100, APGT43.160, DPGT43.100, DPGT43.160, DPGT43HP.100, DPGT43HP.160, PGT23.063, PGT23.100, PGT23.160, PGT43.100, PGT43.160, PGT43HP.100, PGT43HP.160, 712.15.160, 732.15.160, 232.30, 233.30, 232.34, 233.34, 232.36, 233.36, 732.31, 732.51, 732.14, 762.14, DPGS43.100, DPGS43.160, DPGS43HP.100, DPGS43HP.160, 910.14, 312.20, 332.30, 333.30, 332.50, 333.50, 342.11, 422.12, 423.12, 432.36+8xx, 432.56+8xx, 432.50, 433.50, PG43SA-D, 111.10, 111.12, PG43SA-S, DPGT40, DPGS40TA, 532.53+8xx, 610.20, 630.20, 611.10, 631.10, 611.13, 632.50, 633.50, 632.51, 700.01, 700.02, PG23CP, PG23LT, PG23HP-P, PG23HP-S, DPGS40, DPS40, 711.12, 713.12, 731.12, 733.02, 111.12.040, 612.20, 131.11, PGS21.100, PGS21.160, PGS23.063, PGS23.100, PGS23.160, 432.56, 432.36, 532.52, 532.53, 532.54, 632.51+8xx
- Diaphragm seals Applications - operating principle - designs
612.34, 632.34, 633.34, 990.16, 990.49, 990.48, PSD-4, DSS22P, DSS18F, IS-3, S-20, PSA-31, PSD-30, PSD-31, S-10, Hydra-Sensor, Hydra-Gauge, 990.30, 983, 970.10, 970.11, 970.12, 990.38, IPT-10, IPT-11, DPT-10, 232.50, 233.50, 212.20, 981.10, 981.22, 981.52, 981.53, 981.27, 981.50, 981.51, 990.10, 990.15, 990.17, 990.28, 990.34, 990.51, 232.30, 233.30, 232.34, 233.34, 232.36, 233.36, 732.31, 732.51, DSS22F, DSS10M, DSS34M, DSS27M, DSS26M, DSS19F, DSS22T, DSS18T, DSS19T, DSS10T, DSS34T, DSS27T, DSS26T, UPT-20, UPT-21, 990.18, 990.19, 990.20, 990.21, 990.36, 990.40, 990.31, 990.26, 990.22, 990.52, 990.53, 990.12, 990.41, 990.29, 990.35, 990.23, 990.24, 990.50, 990.60, 981.18, 981.19, 981.20, 981.21, 990.27, PG23CP, PG23HP-P, PG23HP-S
- Functional safety: Safety-relevant temperature measurement per IEC 61508, version 2.2.3 (current version - valid since 2014-08-01)
T32.xS, DIH10, DIH10-Ex, magWIK, CPT-20, CPT-21, TC10-0, TR10-0, DIH50, DIH52, TIF50, TIF52
- Serial numbers on WIKA instruments
TR36
- File formats for customer logos on dials
232.50, 233.50
