WIKA

Measurement technology for the iron and steel industry

Integrated steel works

Steel is one of the most important materials for almost all sectors in civil engineering, in machine and tool building and through to precision engineering. Due to the harsh process conditions and the enormous demand for raw materials and energy, the optimisation of production processes is given high priority. The product quality and reproducibility of batches are of the utmost importance as they reduce the cost of the process. Iron and steel production processes require robust measurement technology that is capable of detecting faults reliably while keeping the cost-effectiveness of the process in view.

When it comes to the right solutions for your production processes, you can rely on WIKA measurement technology.

Iron and steel industry × 3

Pellet plant

Pellet plant
2

Coke plant

Coke plant
4

Blast furnace

Blast furnace
1

Sinter plant

Sinter plant
6

Basic oxygen furnace

Basic oxygen furnace
5

Direct reduced iron plant

Direct reduced iron plant
7

Electric arc furnace

Electric arc furnace
8

Ladle furnace

Ladle furnace
9

Continuous casting plant

Continuous casting plant
10

Calibration and maintenance

Calibration and maintenance
Iron and steel industry
Minimise selection

Sinter plant

Productivity and efficiency

With sintering, a mixture of fine ores, coke, recycled process materials and other aggregates is prepared, through melting, for further use in the blast furnace to ensure gas permeability for the reducing gases.

For the sintering process, the control of the sintering hood and its associated burner and the temperature in the furnace are crucial. A lost oven can result in complete process stop and fluctuating temperatures affect the quality of the product being produced.

WIKA has a portfolio of high-performance measuring instruments that are tailored to the measuring tasks of sinter plants.

Calibration technology and calibration services

Are you looking for suitable calibration equipment for your applications? Get an overview of our wide range of calibrators. Use our calibration service for pressure, temperature, force, flow and electrical measurands. We calibrate your references and test equipment independently of manufacturers in our accredited calibration laboratories, or directly on your premises.

Additional services

WIKA will support you with additional services from our trained experts. Service technicians will make sure that your measuring instruments, in case of breakdowns and repairs, are fully functional again in a short space of time. From pressure controllers and diaphragm seal systems to calibration baths - all from one source. With our field-service we install your measuring units and provide support for the commissioning of the instrumentation. Through our local experts, we can be reached worldwide, are quickly available and tuned to individual circumstances. Try it for yourself.


Sinter plant × CT

Calibration

Calibration
T

Flue gas temperature

Flue gas temperature
L

Level

Level
P

Pressure

Pressure
P

Sintering hood pressure

Sintering hood pressure
T

Sintering hood temperature

Sintering hood temperature
F

Process gas flow

Process gas flow
W

Sintering bunker weight

Sintering bunker weight
T

Temperature

Temperature
P

Pressure

Pressure
Sinter plant
Minimise selection

The following 80 products correspond to your selection. You haven't found the product? Please contact us.

Coke plant

Cost effectiveness and quality

In the coke plant, the coal is converted to coke by heating the prepared coal mixture batch, in the absence of air, to a temperature of 1,000 to 1,300 °C for a period of 16 to 30 hours. Coke, as a reducing agent, has a major impact on the cost-effectiveness of the process and the quality of the final product.

Challenge

The quality of the coke is determined by the mixture of different types of coal. In order to achieve optimal process conditions in coke plants, the furnace pressure and the furnace temperature in the individual furnaces are monitored individually.

In the coke plant, high-precision load cells ensure a controlled mixture of the various types of coal to achieve the desired recipe composition. Our measuring instruments, which are tailored precisely to the respective requirements, guarantee a smooth processing of the vast quantities of raw materials.

Calibration technology and calibration services

Are you looking for suitable calibration equipment for your applications? Get an overview of our wide range ofcalibrators. Use our calibration service for pressure, temperature, force, flow and electrical measurands. We calibrate your references and test equipment independently of manufacturers in our accredited calibration laboratories, or directly on your premises.

Additional services

WIKA will support you with additional services from our trained experts. Service technicians will make sure that your measuring instruments, in case of breakdowns and repairs, are fully functional again in a short space of time. From pressure controllers and diaphragm seal systems to calibration baths - all from one source. We install your measuring units and provide support for the commissioning of the instrumentation. Through our local experts, we can be reached worldwide, are quickly available and tuned to individual circumstances. Try it for yourself.


Coke plant × CT

Calibration

Calibration
T

Flue gas temperature​

Flue gas temperature​
F

Cooling media flow​

Cooling media flow​
P

COG Pressure

COG Pressure
W

Force and weighing equipment

Force and weighing equipment
P

Coke oven chamber pressure

Coke oven chamber pressure
P

Hydraulic equipment pressure​

Hydraulic equipment pressure​
L

Level

Level
T

Coke oven wall temperature

Coke oven wall temperature
F

Coke oven gas flow

Coke oven gas flow
T

Coke oven temperature

Coke oven temperature
F

Process gas flow

Process gas flow
Coke plant
Minimise selection

The following 89 products correspond to your selection. You haven't found the product? Please contact us.

Pellet plant

Productivity and efficiency

Pellets are small balls of iron ore that are used in the production of steel. They are made with technology that utilises the powder that is produced during ore extraction. The process of granulation combines the blending of the raw material and a thermal treatment that burns the soft green pellets into hard balls. The raw material is rolled into a ball and then fired in a furnace or in a travelling grate to sinter the particles into a hard ball.

WIKA offers durable and high-quality process instrumentation for the production of the highest-quality pellets.

Calibration technology and calibration services

Are you looking for suitable calibration equipment for your applications? Get an overview of our wide range ofcalibrators. Use our calibration service for pressure, temperature, force, flow and electrical measurands. We calibrate your references and test equipment independently of manufacturers in our accredited calibration laboratories, or directly on your premises.

Additional services

WIKA will support you with additional services from our trained experts. Service technicians will make sure that your measuring instruments, in case of breakdowns and repairs, are fully functional again in a short space of time. From pressure controllers and diaphragm seal systems to calibration baths - all from one source. We install your measuring units and provide support for the commissioning of the instrumentation. Through our local experts, we can be reached worldwide, are quickly available and tuned to individual circumstances. Try it for yourself.


Pellet plant × CT

Calibration

Calibration
L

Level

Level
T

Temperature

Temperature
T

Temperature

Temperature
T

Temperature

Temperature
P

Pressure

Pressure
F

Flow

Flow
P

Pressure

Pressure
W

Force

Force
Pellet plant
Minimise selection

The following 84 products correspond to your selection. You haven't found the product? Please contact us.

Blast furnace

High reliability for high availability

During the blast furnace process, sinter or pellets, in addition to ore, coke and lime, serve to bind the unwanted constituents of the ore in the slag and also reduce the melting temperature of the iron. They are fed from above into the blast furnace, while hot compressed air is introduced from the tuyères in the lower part. Auxiliary reducing agents or fuels – such as coal, fuel oil, natural gas or other sources – can also be injected from the bottom of the furnace.

The monitoring of fuel pressure and temperature, as well as the monitoring of blast furnace gas pressure are of utmost importance to provide normalised consumption and operating data for the process controls.

Efficient temperature monitoring enables the early detection of possible system failures. WIKA thermocouples have proven themselves to have fast and reliable temperature detection. Another challenge in blast furnace operation is the monitoring of cooling media.

Calibration technology and calibration services

Are you looking for suitable calibration equipment for your applications? Get an overview of our wide range ofcalibrators. Use our calibration service for pressure, temperature, force, flow and electrical measurands. We calibrate your references and test equipment independently of manufacturers in our accredited calibration laboratories, or directly on your premises.

Additional services

WIKA will support you with additional services from our trained experts. Service technicians will make sure that your measuring instruments, in case of breakdowns and repairs, are fully functional again in a short space of time. From pressure controllers and diaphragm seal systems to calibration baths - all from one source. We install your measuring units and provide support for the commissioning of the instrumentation. Through our local experts, we can be reached worldwide, are quickly available and tuned to individual circumstances. Try it for yourself.


Blast furnace × CT

Calibration

Calibration
P

Blast furnace top gas pressure

Blast furnace top gas pressure
L

Level

Level
T

Blast furnace shell temperature

Blast furnace shell temperature
T

Hot blast stove dome temperature

Hot blast stove dome temperature
W

Wire rope force measurement

Wire rope force measurement
T

Refractory lining temperature

Refractory lining temperature
P

Hot blast pressure

Hot blast pressure
F

Cooling water flow

Cooling water flow
F

Hot blast flow

Hot blast flow
W

Force

Force
Blast furnace
Minimise selection

The following 90 products correspond to your selection. You haven't found the product? Please contact us.

Direct reduced iron plant

Process safety

Direct reduced iron (DRI), an alternative way of producing iron, has been developed to overcome the difficulties of conventional blast furnaces. DRI is successfully implemented in various parts of the world using natural gas or coal technology. On the one hand, the DRI process is very energy-efficient; on the other hand, further energy gains can be realised if the hot material is immediately transferred to an EAF melting operation (EAF = electric arc furnace). In this way, the heat from the direct reduced iron process reduces the cost of melting the DRI in the EAF, significantly reducing energy costs.

Hydrogen represents a special challenge of the DRI process. WIKA offers special pressure and temperature sensors for hydrogen applications to ensure the smooth running of the DRI process.

Calibration technology and calibration services

Are you looking for suitable calibration equipment for your applications? Get an overview of our wide range ofcalibrators. Use our calibration service for pressure, temperature, force, flow and electrical measurands. We calibrate your references and test equipment independently of manufacturers in our accredited calibration laboratories, or directly on your premises.

Additional services

WIKA will support you with additional services from our trained experts. Service technicians will make sure that your measuring instruments, in case of breakdowns and repairs, are fully functional again in a short space of time. From pressure controllers and diaphragm seal systems to calibration baths - all from one source. We install your measuring units and provide support for the commissioning of the instrumentation. Through our local experts, we can be reached worldwide, are quickly available and tuned to individual circumstances. Try it for yourself.


Direct reduced iron plant × CT

Calibration

Calibration
P

Off gas pressure

Off gas pressure
T

Top gas temperature

Top gas temperature
P

Reduction gas pressure​

Reduction gas pressure​
T

Reduction gas temperature

Reduction gas temperature
T

Reformer or heater temperature

Reformer or heater temperature
F

Feed gas flow​

Feed gas flow​
F

Natural gas flow

Natural gas flow
L

Level

Level
W

Force

Force
Direct reduced iron plant
Minimise selection

The following 85 products correspond to your selection. You haven't found the product? Please contact us.

Basic oxygen furnace

Ensuring the steel quality

The pig iron produced in the blast furnace is used in the steel works in a liquid state where it is converted into crude steel in the converters. Here, the carbon contained in the pig iron is burnt by blowing in pure oxygen. An important trend in steel metallurgy is the rise in steel grades with increasing flexibility of metallurgical plants, in addition to which the further improvement of the logistics in steel works remains a permanent challenge. In steel converters, the troublesome tramp elements contained in pig iron, such as carbon, silicon, sulphur and phosphorus, are removed in the basic oxygen furnace (BOF) by blowing in oxygen. In doing this, temperatures of up to 1,700 °C are generated in the converter.

Efficient and safe cooling of the converter system is indispensable. Here, WIKA flow measuring elements combined with differential pressure transmitters are used, whereby inlet and outlet temperatures are recorded by means of temperature sensors.

Calibration technology and calibration services

Are you looking for suitable calibration equipment for your applications? Get an overview of our wide range ofcalibrators. Use our calibration service for pressure, temperature, force, flow and electrical measurands. We calibrate your references and test equipment independently of manufacturers in our accredited calibration laboratories, or directly on your premises.

Additional services

WIKA will support you with additional services from our trained experts. Service technicians will make sure that your measuring instruments, in case of breakdowns and repairs, are fully functional again in a short space of time. From pressure controllers and diaphragm seal systems to calibration baths - all from one source. We install your measuring units and provide support for the commissioning of the instrumentation. Through our local experts, we can be reached worldwide, are quickly available and tuned to individual circumstances. Try it for yourself.


Basic oxygen furnace
Basic oxygen furnace

The following 83 products correspond to your selection. You haven't found the product? Please contact us.

Electric arc furnace

Energy and raw material efficiency

Scrap-based steels are recovered in the electric arc furnace.

After loading the furnace, the melting process begins with the ignition of the arc. Using lances and/or burner systems and injectors in the furnace wall, the introduction of the oxygen and the fuel/gas mixtures takes place in order to accelerate the melting and reduce the electrical energy requirement.

Through monitoring of fuel pressure, temperature and flow values, normalised consumption and operating data are provided for the process controls. WIKA flow measuring instruments and pressure and temperature sensors perform this control task reliably and accurately.

Calibration technology and calibration services

Are you looking for suitable calibration equipment for your applications? Get an overview of our wide range ofcalibrators. Use our calibration service for pressure, temperature, force, flow and electrical measurands. We calibrate your references and test equipment independently of manufacturers in our accredited calibration laboratories, or directly on your premises.

Additional services

WIKA will support you with additional services from our trained experts. Service technicians will make sure that your measuring instruments, in case of breakdowns and repairs, are fully functional again in a short space of time. From pressure controllers and diaphragm seal systems to calibration baths - all from one source. We install your measuring units and provide support for the commissioning of the instrumentation. Through our local experts, we can be reached worldwide, are quickly available and tuned to individual circumstances. Try it for yourself.


Electric arc furnace × CT

Calibration

Calibration
P

Pressure

Pressure
L

Level

Level
P

Cooling circuit pressure

Cooling circuit pressure
T

Temperature

Temperature
T

Cooling media temperature

Cooling media temperature
F

Coolant and Gas flow

Coolant and Gas flow
W

Force

Force
Electric arc furnace
Minimise selection

The following 83 products correspond to your selection. You haven't found the product? Please contact us.

Ladle furnace

Improving the purity grade

Ladle furnaces in steel works are used in secondary metallurgy for the treatment of liquid steel. The melt is further desulphurised and adjusted to produce the steel grade desired by the customer.

The cover of the ladle furnace is usually lined with refractory materials and water-cooled. To ensure optimum operation of the ladle furnace, the exhaust duct, the electrode arms and the cabling are also cooled. For this, sufficient water pressure and the correct water inlet temperature are crucial.

Thanks to their robust measuring technology, our resistance thermometers and pressure sensors are ideal for monitoring cooling water. Pressure sensors can be installed quickly and easily due to their compact dimensions.

Calibration technology and calibration services

Are you looking for suitable calibration equipment for your applications? Get an overview of our wide range ofcalibrators. Use our calibration service for pressure, temperature, force, flow and electrical measurands. We calibrate your references and test equipment independently of manufacturers in our accredited calibration laboratories, or directly on your premises.

Additional services

WIKA will support you with additional services from our trained experts. Service technicians will make sure that your measuring instruments, in case of breakdowns and repairs, are fully functional again in a short space of time. From pressure controllers and diaphragm seal systems to calibration baths - all from one source. We install your measuring units and provide support for the commissioning of the instrumentation. Through our local experts, we can be reached worldwide, are quickly available and tuned to individual circumstances. Try it for yourself.


Ladle furnace × L

Level

Level
CT

Calibration

Calibration
P

Pressure

Pressure
T

Temperature

Temperature
P

Pressure

Pressure
T

Temperature

Temperature
F

Flow

Flow
W

Force

Force
Ladle furnace
Minimise selection

The following 75 products correspond to your selection. You haven't found the product? Please contact us.

Continuous casting plant

For the highest demands

In the continuous casting process, the liquid steel flows from the ladle through the distributor into the moulds. The steel-filled ladle is suspended in a rotatable tower that can hold two ladles. In the casting operation, both thermal and pressure monitoring methods are used to detect local escape of liquid steel or for penetration detection.

In order to prevent the penetration, it is essential to detect the temperature profile in the casting mould so that the development of cracks can be determined. For this purpose, thermocouples are embedded in the narrow and broad sides of the mould so that they show a two-dimensional temperature profile of all sides of the mould. To determine the heat dissipation in the mould, the cooling water temperature at the cooling water inlet and outlet and also the coolant quantity are measured.

WIKA takes into account the harsh operating conditions of steel foundries with extremely robust products. They feature high resistance against shock, vibration and temperature fluctuations, high IP ingress protection and also outstanding EMC characteristics.

Calibration technology and calibration services

Are you looking for suitable calibration equipment for your applications? Get an overview of our wide range ofcalibrators.Use our calibration service for pressure, temperature, force, flow and electrical measurands. We calibrate your references and test equipment independently of manufacturers in our accredited calibration laboratories, or directly on your premises.

Additional services

WIKA will support you with additional services from our trained experts. Service technicians will make sure that your measuring instruments, in case of breakdowns and repairs, are fully functional again in a short space of time. From pressure controllers and diaphragm seal systems to calibration baths - all from one source. We install your measuring units and provide support for the commissioning of the instrumentation. Through our local experts, we can be reached worldwide, are quickly available and tuned to individual circumstances. Try it for yourself.


Continuous casting plant × CT

Calibration

Calibration
T

Mould temperature monitoring

Mould temperature monitoring
L

Level

Level
F

Cooling water inlet flow

Cooling water inlet flow
P

Pressure

Pressure
T

Cooling water temperature monitoring

Cooling water temperature monitoring
P

Pressure

Pressure
W

Force

Force
Continuous casting plant
Minimise selection

The following 73 products correspond to your selection. You haven't found the product? Please contact us.

Calibration & service centre

Consultation, design, implementation – all from one source

Precise calibration instruments are the starting point for resolving your test requirements. However, they only form one part of a high-performance calibration system. From our extensive product range, we can design a complete and individual solution for you which contains all the relevant components: with adaptability for test items, pressure and vacuum supply, components for pressure control and fine adjustment, through to voltage supply and multimeters for the calibration of electrical test items.

Our particular strength lies in the project planning, development and the building of complete, individual, application-specific systems – from simple manual work stations through to fully automated test systems in production lines.

Calibration technology and calibration services

Are you looking for suitable calibration equipment for your applications? Get an overview of our wide range ofcalibrators. Use our calibration service for pressure, temperature, force, flow and electrical measurands. We calibrate your references and test equipment independently of manufacturers in our accredited calibration laboratories, or directly on your premises.

Additional services

WIKA will support you with additional services from our trained experts. Service technicians will make sure that your measuring instruments, in case of breakdowns and repairs, are fully functional again in a short space of time. From pressure controllers and diaphragm seal systems to calibration baths - all from one source. We install your measuring units and provide support for the commissioning of the instrumentation. Through our local experts, we can be reached worldwide, are quickly available and tuned to individual circumstances. Try it for yourself.


Calibration & service centre × CT

Calibration Pressure

Calibration Pressure
CT

Calibration Pressure

Calibration Pressure
CT

Calibration Temperature

Calibration Temperature
Calibration & service centre
Minimise selection

The following 21 products correspond to your selection. You haven't found the product? Please contact us.