- Mechanische Temperaturmessgeräte
TG53, 55, A43, A50, A48, A46, 75, A52, R52, SB15, 70-8xx, SC15, TF58, TF59, TGT73, SW15, 53, IFC, 54, 32, TGT70, 73, 74, 70, 74-8xx, TGS73, TGS55, TG58SA, TG54
- Einsatz von Thermoelementen
TC10-2, TC10-L, TC47-AB, TC47-NT, TC47-MT, TC81, TC90, TC59-V, TC59-W, T16, TC47-RL, TC84, TC12-A, TC12-B, TC12-M, TC10-K, TC46, TC10-A, TC10-B, TC10-C, TC10-D, TC10-F, TC10-H, TC40, TC50, TC53, CTP2000, CTP9000, TC59-T, TC10-0, TC96-M, TC94, TC97, TR96-O, TC96-O, TC96-R, TC59-X, TC59-R, TC80, TC95, TC15, TC45, TC85, TC10-3, TC10-9, TC15-2, TC10-4
- Anschlussflansche für Druckmessgeräte mit Plattenfeder
432.56, 432.36, PGT43HP.100, PGT43HP.160, 422.12, 423.12, PGT43.100, PGT43.160, APGT43.100, APGT43.160, 532.53+8xx, 532.52, 532.53, 532.54, 432.50, 433.50, 432.36+8xx, 432.56+8xx
- Fixpunktkalibrierung nach ITS-90
CTR3000, CTP2000, CTP9000, CTP5000, CTR9000, CTR6500, CTR6000, CTR5000
- Callendar-Van Dusen-Gleichungen bei der Kalibrierung von Platin-Widerstandsthermometern
TR22-B, TR21-A, TR22-A, TR21-B, TR21-C, TR10-A, TR10-B, TR10-C, TR10-D, TR10-F, TR10-H, TR10-J, TR20, TR55, TR81, TR11-A, TR10-K, TR12-A, TR12-B, TR12-M, TR25, TR40, TR50, TR53, CTP2000, CTP9000, TR10-0, TR34, TR30, TR31, CTP5000, TR33, TR75, TR10-L, TR95, TR60
- Hinweise zur Geräteschutzart nach DIN EN 60529 und NEMA für Rohr- oder Plattenfedermanometer
A2G-70, DPT-20, DPGS40TA, DPGT40, A2G-15, A2G-200, 332.50, 333.50, PSM06, A2G-25, 732.31, 733.31, 732.51, 733.51, PG43SA-D, DPGT43HP.100, DPGT43HP.160, DPS40, 610.20, 630.20, A2G-20, 111.10, 111.12, PSM02, 332.30, 333.30, 111.11, 111.31, A2G-85, 712.15.100, 732.15.100, 232.50, 233.50, PGT10 USB, 716.05, 212.20, SB15, UPT-20, UPT-21, 70-8xx, SC15, DPGT43.100, DPGT43.160, SW15, 432.56, 432.36, PGS21, IFC, PGT43HP.100, PGT43HP.160, 732.18, 733.18, 312.20, PGT21, PG43SA-C, 213.40, 422.12, 423.12, 213.53, IPT-10, IPT-11, 632.51, PGT43.100, PGT43.160, 113.53, PG43SA-S, 232.30, 233.30, 101.00, 101.12, 112.28, 132.28, PGS25, TGT70, PG23HP-P, PG23LT, DPGS43.100, DPGS43.160, APGT43.100, APGT43.160, 712.15.160, 732.15.160, PGS23.100, PGS23.160, 732.14, 762.14, PG23HP-S, PG23CP, DPGS40, DPG40, PGT23.063, PGT23.100, PGT23.160, 716.11, 736.11, 232.36, 233.36, 232.34, 233.34, PGS23.063, 113.13, 111.16, 111.26, DPGS43HP.100, DPGS43HP.160, 711.12, 713.12, 731.12, 733.02, 700.01, 700.02, 70, 632.51+8xx, 532.53+8xx, 532.52, 532.53, 532.54, 432.50, 433.50, 432.36+8xx, 432.56+8xx, 342.11, PGS21.100, PGS21.160, 131.11, A2G-mini, 612.20, A2G-05, A2G-10, A2G-50, A2G-55, A2G-60, A2G-65, 611.10, 631.10, PSM01, TF37, A2G-100, A2G-30, A2G-40, A2G-45, A2G-52, A2G-80, A2G-90, 612.34, 632.34, 633.34, STW15, PSM03, SC58, 632.50, 633.50, 611.13, 111.12.040, PG21HD, PSM04, PSM05
- Schutzrohrberechnung
TW55, TW10, TG53, 55, TW20, TW22, TW35, TW25, TW30, TW40, TW45, TW50, TW10-P, 75, A52, R52, TW61, 53, 54, 73, 74, 74-8xx, TW60, TGS73, TGS55, TW10-B, TW10-S, TG54
- Allgemeine Information über NACE-Standards für Sauergas-Anwendungen bei WIKA-Produkten
TW55, DPT-20, CPT-20, CPT-21, TW10, TW20, 990.40, 990.41, 990.28, 990.26, TW25, TW30, TW50, TW10-P, 232.50, 233.50, IPT-20, IPT-21, 990.35, 990.29, 990.27, UPT-20, UPT-21, 990.36, E-10, E-11, 990.15, 990.12, 990.10, IPT-10, IPT-11, PGT43.100, PGT43.160, 990.34, 232.30, 233.30, PG23LT, 732.14, 762.14, PG23CP, 232.36, 233.36, 981.10, 981.27, 990.38, 990.45, TW10-B, TW10-S, TR60
- Rückführbare Kalibrierung von Wechselstrom-Widerstandsmessbrücken auf nationale Normale
CTR9000, CTR6500
- Geräteperformance der Primärnormal-Widerstandsmessbrücke Typ CTR9000 (F900)
CTR9000
- WIKA-Standard-Dokumentation
DPT-20, TG53, 55, 732.31, 733.31, 732.51, 733.51, DPGT43HP.100, DPGT43HP.160, PGS21, 232.50, 233.50, 75, A52, R52, 212.20, UPT-20, UPT-21, TGT73, NETRIS3, DPGT43.100, DPGT43.160, 53, 54, 213.40, 213.53, IPT-10, IPT-11, 113.53, 232.30, 233.30, 101.00, 101.12, 112.28, 132.28, PG23HP-P, PG23LT, DPGS43.100, DPGS43.160, PGS23.100, PGS23.160, PG23HP-S, 73, 74, PG23CP, PGT23.063, PGT23.100, PGT23.160, 732.14, 762.14, 232.36, 233.36, 232.34, 233.34, PGS23.063, 113.13, DPGS43HP.100, DPGS43HP.160, 532.52, 532.53, 532.54, 432.50, 433.50, 74-8xx, PGS21.100, PGS21.160, 131.11, TGS73, TGS55, 612.34, 632.34, 633.34, 632.50, 633.50, TG54, PG81, PG91, PG21HD
- Wärmefühler, Anschlussbauformen und Schutzrohre für die mechanischen und mechatronischen Tensionsthermometer
SB15, 70-8xx, SC15, TF58, TF59, SW15, IFC, TGT70, 70, STW15
- Druckgeräterichtlinie 2014/68/EU (DGRL) im Hinblick auf Schutzrohre
TW55, TW10, TW20, TW22, TW25, TW30, TW40, TW35, TW45, TW50, TW10-P, SB15, TW61, SW15, TW60, TF37, STW15, TW10-B, TW10-S
- Material-Verwechslungsprüfung (PMI-Test)
TW55, TW10, TW20, TW22, TW35, TW25, TW30, TW40, TW45, TW50, TW10-P, TW61, TW60, TW10-B, TW10-S
- Montagearten Befestigungsränder, Schalttafelausschnitte
332.50, 333.50, DPGT43HP.100, DPGT43HP.160, 610.20, 630.20, 111.10, 111.12, 332.30, 333.30, 111.11, 111.31, 712.15.100, 732.15.100, 232.50, 233.50, PGT10 USB, 716.05, 212.20, 70-8xx, TGT73, PGS21, 732.18, 733.18, 312.20, PGT21, 232.30, 233.30, PGS25, TGT70, PG23HP-P, PG23LT, 712.15.160, 732.15.160, PGS23.100, PGS23.160, 732.14, 762.14, PG23HP-S, 73, PG23CP, PGT23.063, PGT23.100, PGT23.160, 716.11, 736.11, 232.36, 233.36, 232.34, 233.34, PGS23.063, 111.16, 111.26, 711.12, 713.12, 731.12, 733.02, 700.01, 700.02, 70, 342.11, PGS21.100, PGS21.160, 131.11, DPGS43HP.100, DPGS43HP.160, 612.20, 611.10, 631.10, 612.34, 632.34, 633.34, 632.50, 633.50, 611.13, 111.12.040
- Druckmittlersysteme für Vakuumprozesse
981.50, 990.60, DPT-20, 990.40, 990.41, 990.28, 990.26, 990.24, DSSA11SA, 990.35, 990.31, 990.29, 990.27, 990.23, 990.18, 990.19, 990.20, 990.21, 990.17, UPT-20, UPT-21, 990.50, 990.36, 990.22, 990.52, 990.53, 990.15, 990.12, 990.10, 981.51, IPT-10, IPT-11, 990.51, 990.34, 981.10, 981.18, 981.19, 981.20, 981.21, 981.22, 981.52, 981.53, 981.27, 990.38, 990.45
- Überdruckmessgeräte mit elastischem Messglied
DPGS40TA, DPGT40, 332.50, 333.50, 732.31, 733.31, 732.51, 733.51, PG43SA-D, DPGT43HP.100, DPGT43HP.160, 610.20, 630.20, DPS40, 111.10, 111.12, 332.30, 333.30, 111.11, 111.31, 232.50, 233.50, 216.06.050, 216.40.050, PGT10 USB, 716.05, 212.20, 712.15.100, 732.15.100, 432.56, 432.36, PGS21, 312.20, PGT43HP.100, PGT43HP.160, 732.18, 733.18, PGT21, PG43SA-C, 213.40, 213.53, PGT43.100, PGT43.160, 632.51, 422.12, 423.12, 113.53, PG43SA-S, 232.30, 233.30, 101.00, 101.12, PGS25, PG23HP-P, PG23LT, DPGT43.100, DPGT43.160, DPGS43.100, DPGS43.160, APGT43.100, APGT43.160, 712.15.160, 732.15.160, PGS23.100, PGS23.160, PG23HP-S, PG23CP, DPGS40, DPG40, PGT23.063, PGT23.100, PGT23.160, 716.11, 736.11, 732.14, 762.14, 232.36, 233.36, 232.34, 233.34, PGS23.063, 113.13, 111.16, 111.26, 711.12, 713.12, 731.12, 733.02, 700.01, 700.02, 632.51+8xx, 532.53+8xx, 532.52, 532.53, 532.54, 432.50, 433.50, 432.36+8xx, 432.56+8xx, 342.11, PGS21.100, PGS21.160, 131.11, DPGS43HP.100, DPGS43HP.160, 612.20, 611.10, 631.10, 612.34, 632.34, 633.34, 632.50, 633.50, 611.13, 111.12.040, PG81, PG91, PG21HD, PG21DPB, PG21PB
- Spezifikationen von öl- und fettfreien Geräten
DSSA11SA, A-1200, PG81, PG91
- Einsatzgrenzen und Genauigkeiten von Platin-Widerstandsthermometern nach DIN EN IEC 60751
TR22-B, TR10-2, TR22-A, TR21-A, TR21-B, TR21-C, TR10-A, TR10-B, TR10-C, TR10-D, TR10-F, TF45, TR10-H, TF44, TR10-J, TR20, TR55, TR81, TR41, TR11-A, TR10-K, TF35, TR11-H, T12, OTMT84, OTMT85, TR12-A, TR12-B, TR12-M, TR25, TR40, TR50, TR53, CTP2000, CTP9000, CTP6000, TR10-0, T15, TR34, TR30, TF37, TR31, CTP5000, TR96-O, TC96-O, TR57-M, TF41, TF40, TR33, TF43, TR75, TR10-L, T91.30, T53, TR95, TR60, T91.10, T91.20, T24, T32.xS, TR45, TR58, TR10-3, TR15-2, TR15, TR10-4
- Stutzenausführungen - Positionierung eines Stützankers
TW10
- Bauweise von Schutzrohren in Sonderlänge
TW55, TW10, TW20, TW25, TW30, TW50, TW10-P, TW10-B, TW10-S
- Umrechnungsfaktoren der üblichen Einheiten des Druckes
CPB5800, DPT-20, DPGS40TA, DPGT40, A2G-15, A2G-200, CPC2090, 332.50, 333.50, CPH7600, PSM06, PXS, 732.31, 733.31, 732.51, 733.51, CPC6050, DPGT43HP.100, DPGT43HP.160, DPS40, 610.20, 630.20, 111.10, 111.12, PSM02, PXA, WU-20, WU-25, WU-26, 332.30, 333.30, CPC8000, 432.25.2, 111.11, 111.31, 716.11, 736.11, 100.0x, 100.1x, 232.50, 233.50, 216.06.050, 216.40.050, PGT10 USB, WUC-10, WUC-15, WUC-16, BWX, 716.05, 212.20, UPT-20, UPT-21, 712.15.100, 732.15.100, DPGT43.100, DPGT43.160, 432.56, 432.36, PGS21, 732.18, 733.18, PGT43HP.100, PGT43HP.160, 312.20, A-AS-1, PSM01, WUR-1, WUD-20-E, WUD-25-E, WUD-26-E, CPB3800, PGT21, PG43SA-C, 910.25, 632.51, 213.53, PGT43.100, PGT43.160, IPT-10, IPT-11, 422.12, 423.12, 113.53, 101.00, 101.12, PG43SA-S, 232.30, 233.30, 112.28, 132.28, PGS25, THM10, PG23HP-P, PG23LT, DPGS43.100, DPGS43.160, APGT43.100, APGT43.160, 712.15.160, 732.15.160, PGS23.100, PGS23.160, PG23HP-S, CPT2500, PG23CP, DPGS40, DPG40, PGT23.063, PGT23.100, PGT23.160, 732.14, 762.14, 213.40, 232.36, 233.36, 232.34, 233.34, PGS23.063, 230.15-851, PG43SA-D, 113.13, 111.16, 111.26, 151.10, 151.12, DPGS43HP.100, DPGS43HP.160, 711.12, 713.12, 731.12, 733.02, 700.01, 700.02, 632.51+8xx, 532.53+8xx, 532.52, 532.53, 532.54, 432.50, 433.50, 432.36+8xx, 432.56+8xx, 342.11, 230.15, PGS21.100, PGS21.160, 131.11, A2G-mini, 612.20, A2G-05, A2G-10, A2G-50, A2G-55, 611.10, 631.10, PCA, PCS, CPH6000, CPT6000, DW, DW10, A2G-100, A2G-30, A2G-40, A2G-45, A2G-52, A2G-90, CPG2500, CPG500, CPH6300, CPT6100, CPT6180, iWU-20, iWU-25, iWU-26, 612.34, 632.34, 633.34, DW03UN, PSM03, CPB5000HP, 632.50, 633.50, CPH65I0, MW, DE, DEC, DA, DA10, 611.13, 111.12.040, CPB5000DP, DC, DCC, PG81, PG91, PGT23.063UHP, PG21HD, MA, BA, BAX, APA, APA10, PSM04, CPH6200, CPT6200, APW, APW10, CPC8000-H, CPC2000, CPH62I0, CPH6400, CPB3500, CPB3800HP, CPB5000, PSM05
- Einsatzhülsen für Temperatur-Blockkalibratoren
CTD4000
- Auswahl, Anbringung, Behandlung und Bedienung von Manometern
DPGS40TA, DPGT40, 332.50, 333.50, 732.31, 733.31, 732.51, 733.51, PG43SA-D, DPGT43HP.100, DPGT43HP.160, DPS40, 610.20, 630.20, 910.22, 111.10, 111.12, 332.30, 333.30, 111.11, 111.31, 712.15.100, 732.15.100, 232.50, 233.50, PGT10 USB, 910.15, 716.05, PMM01, 212.20, 432.56, 432.36, PGS21, PG23HP-S, PGT43HP.100, PGT43HP.160, 312.20, 732.18, 733.18, 910.25, PGT21, PG43SA-C, 910.80, DPGT43.100, DPGT43.160, 632.51, PGT43.100, PGT43.160, 422.12, 423.12, PMT01, PG43SA-S, 232.30, 233.30, 151.10, 151.12, PGS25, PG23HP-P, PG23LT, DPGS43.100, DPGS43.160, APGT43.100, APGT43.160, 712.15.160, 732.15.160, PGS23.100, PGS23.160, 732.14, 762.14, PG23CP, DPGS40, DPG40, PGT23.063, PGT23.100, PGT23.160, 716.11, 736.11, 232.36, 233.36, 232.34, 233.34, PGS23.063, 111.16, 111.26, 711.12, 713.12, 731.12, 733.02, 700.01, 700.02, 632.51+8xx, 532.53+8xx, 532.52, 532.53, 532.54, 432.50, 433.50, 432.36+8xx, 432.56+8xx, 342.11, PGS21.100, PGS21.160, 131.11, DPGS43HP.100, DPGS43HP.160, 612.20, 910.12, 910.13, 910.17, 611.10, 631.10, 910.11, 612.34, 632.34, 633.34, 910.14, 632.50, 633.50, 910.18, 910.16, 910.10, 611.13, 111.12.040, PG81, PG91
- Anzeigebereiche von Manometern, Teilstrichabstand und Bezifferung der Skale nach EN 837
DPGS40TA, 332.50, 333.50, 732.31, 733.31, 732.51, 733.51, DPGT40, DPGT43HP.100, DPGT43HP.160, DPS40, 111.10, 111.12, 610.20, 630.20, 332.30, 333.30, 111.11, 111.31, 100.0x, 100.1x, 232.50, 233.50, PGT10 USB, 212.20, 716.05, 712.15.100, 732.15.100, DPGT43.100, DPGT43.160, 432.56, 432.36, PGS21, 732.18, 733.18, 312.20, PGT43HP.100, PGT43HP.160, PGT21, PG43SA-C, 422.12, 423.12, 632.51, PGT43.100, PGT43.160, PG43SA-S, 232.30, 233.30, PGS25, THM10, PG23HP-P, PG23LT, 716.11, 736.11, DPGS43.100, DPGS43.160, 712.15.160, 732.15.160, PGS23.100, PGS23.160, PG23HP-S, PG23CP, DPGS40, DPG40, PGT23.063, PGT23.100, PGT23.160, 732.14, 762.14, 232.36, 233.36, 232.34, 233.34, PGS23.063, PG43SA-D, 111.16, 111.26, 151.10, 151.12, DPGS43HP.100, DPGS43HP.160, 711.12, 713.12, 731.12, 733.02, 700.01, 700.02, 632.51+8xx, 532.53+8xx, 532.52, 532.53, 532.54, 432.50, 433.50, 432.36+8xx, 432.56+8xx, 342.11, PGS21.100, PGS21.160, 131.11, 612.20, 611.10, 631.10, 612.34, 632.34, 633.34, 632.50, 633.50, 611.13, 111.12.040
- Montageanordnungen, Geräte-Hook-ups für die Prozessindustrie
DPGS40TA, DPGT40, 732.31, 733.31, 732.51, 733.51, 332.50, 333.50, DPGT43HP.100, DPGT43HP.160, DPS40, 910.22, 610.20, 630.20, 111.10, 111.12, PGS21, HPFA, 111.11, 111.31, 716.11, 736.11, 232.50, 233.50, IV20, IV21, 910.15, PGT10 USB, 332.30, 333.30, 212.20, 716.05, 712.15.100, 732.15.100, DPGT43.100, DPGT43.160, IV10, IV11, 432.56, 432.36, 732.18, 733.18, 312.20, PGT43HP.100, PGT43HP.160, PGT21, PG43SA-C, 910.25, 632.51, 910.80, 422.12, 423.12, PGT43.100, PGT43.160, 232.30, 233.30, PGS25, PG23LT, DPGS43.100, DPGS43.160, APGT43.100, APGT43.160, 712.15.160, 732.15.160, PGS23.100, PGS23.160, PG23CP, DPGS40, DPG40, PGT23.063, PGT23.100, PGT23.160, 732.14, 762.14, 232.36, 233.36, 232.34, 233.34, PGS23.063, 111.16, 111.26, DPGS43HP.100, DPGS43HP.160, 711.12, 713.12, 731.12, 733.02, 700.01, 700.02, 632.51+8xx, 532.53+8xx, 532.52, 532.53, 532.54, 432.50, 433.50, 432.36+8xx, 432.56+8xx, 342.11, PGS21.100, PGS21.160, 131.11, 612.20, 910.12, 910.13, 910.17, 611.10, 631.10, IV30, IV31, IV50, IV51, 910.11, HPNV, 612.34, 632.34, 633.34, 910.14, 632.50, 633.50, 910.18, 910.16, 910.10, 611.13, HPCV
- Druckmittler und Druckmittlersysteme, Anwendung - Funktionsweise - Bauart
990.49, DSS10T, DSS26M, 990.60, DPT-20, DSS26T, DSS22T, DSS19F, 981.50, 990.41, 732.31, 733.31, 732.51, 733.51, 990.28, 990.26, 990.24, DSS19T, 990.40, IS-3, DSS27M, IPT-10, IPT-11, 232.50, 233.50, 990.16, 212.20, 990.48, DSS27T, DSS34T, DSS18T, DSS34M, DSS18F, 990.35, 990.31, 990.29, 990.27, 990.23, 990.18, 990.19, 990.20, 990.21, DSSA11SA, UPT-20, UPT-21, DSS10M, DSS22F, 990.50, 990.36, 990.30, 990.22, 990.52, 990.53, 990.17, 990.15, 990.12, 990.10, 983, 981.51, 970.10, 970.11, 970.12, DSS22P, 990.51, 990.34, 232.30, 233.30, PG23HP-P, PG23HP-S, PG23CP, 232.36, 233.36, 981.10, 981.18, 981.19, 981.20, 981.21, 232.34, 233.34, PSD-4, 981.22, 981.52, 981.53, 981.27, 990.38, S-20, 990.45, 612.34, 632.34, 633.34, Hydra-Sensor, Hydra-Gauge, S-10
- Mechanische Montage für WIKA-Drucksensoren und WIKA-Druckschalter
DPGS40TA, N-10, N-11, DPGT40, 332.50, 333.50, 610.20, 630.20, 732.31, 733.31, 732.51, 733.51, PG43SA-D, DPGT43HP.100, DPGT43HP.160, DPS40, 111.10, 111.12, IS-3, 332.30, 333.30, TSD-30, 111.11, 111.31, 712.15.100, 732.15.100, 232.50, 233.50, 111.12.040, PG21HD, LSD-30, PGT10 USB, MH-1, MH-2, IPT-10, IPT-11, D-10-7, D-11-7, DG-10, 716.05, MPR-1, 212.20, UPT-20, UPT-21, MHC-1, 432.56, 432.36, MTF-1, E-10, E-11, PGS21, PGT43HP.100, PGT43HP.160, 732.18, 733.18, 312.20, WUD-20-E, WUD-25-E, WUD-26-E, PGT21, PG43SA-C, 213.40, 213.53, 632.51, DPGT43.100, DPGT43.160, MH-4-CAN, PGT43.100, PGT43.160, 422.12, 423.12, 113.53, A-1200, LS-10, PG43SA-S, 232.30, 233.30, 101.00, 101.12, 112.28, 132.28, PGS25, PG23HP-P, PG23LT, DPGS43.100, DPGS43.160, APGT43.100, APGT43.160, 712.15.160, 732.15.160, PGS23.100, PGS23.160, 732.14, 762.14, PG23HP-S, PG23CP, DPGS40, DPG40, PGT23.063, PGT23.100, PGT23.160, 716.11, 736.11, 232.36, 233.36, 232.34, 233.34, PGS23.063, 113.13, 111.16, 111.26, 711.12, 713.12, 731.12, 733.02, 700.01, 700.02, 632.51+8xx, 532.53+8xx, 532.52, 532.53, 532.54, 432.50, 433.50, 432.36+8xx, 432.56+8xx, PSD-4, PSD-4-ECO, 342.11, PGS21.100, PGS21.160, 131.11, DPGS43HP.100, DPGS43HP.160, S-20, 612.20, 910.17, 611.10, 631.10, HP-2, A-10, IL-10, MH-4, 612.34, 632.34, 633.34, MH-3-HY, LH-20, O-10, 632.50, 633.50, MG-1, P-30, P-31, S-11, R-1, 611.13, S-10, D-20-9, D-21-9, M-10, M-11, LH-10, C-2
- Wasserstoffanwendungen mit elektronischen Drucksensoren
IS-3, IPT-20, IPT-21, UPT-20, UPT-21, E-10, E-11, S-20
- Verbesserung der Gesamtunsicherheit einer Kalibrierung mit einem Temperatur-Blockkalibrator (industrielle Anwendungen)
CTD9350, CTD9100, CTM9100-150, CTD9100-1100, CTD9100-375, CTD9300, CTD9100-ZERO, CTD4000
- Prozessanschluss nach EN 837
910.22, DPGS40TA, 732.31, 733.31, 732.51, 733.51, 332.50, 333.50, DPGT40, DPGT43HP.100, DPGT43HP.160, DPS40, 610.20, 630.20, 111.10, 111.12, 332.30, 333.30, PGS21, 111.11, 111.31, 232.50, 233.50, PGT10 USB, 212.20, 716.05, UPT-20, UPT-21, 712.15.100, 732.15.100, DPGT43.100, DPGT43.160, 432.56, 432.36, 732.18, 733.18, 312.20, PGT43HP.100, PGT43HP.160, PGT21, 910.25, 632.51, 910.80, 422.12, 423.12, IPT-10, IPT-11, PGT43.100, PGT43.160, 232.30, 233.30, PGS25, PG23HP-P, PG23LT, 716.11, 736.11, DPGS43.100, DPGS43.160, 712.15.160, 732.15.160, PGS23.100, PGS23.160, PG23HP-S, PG23CP, DPGS40, DPG40, PGT23.063, PGT23.100, PGT23.160, 732.14, 762.14, 232.36, 233.36, 232.34, 233.34, PGS23.063, 111.16, 111.26, DPGS43HP.100, DPGS43HP.160, 711.12, 713.12, 731.12, 733.02, 700.01, 700.02, 632.51+8xx, 532.53+8xx, 532.52, 532.53, 532.54, 432.50, 433.50, 432.36+8xx, 432.56+8xx, 342.11, PGS21.100, PGS21.160, 131.11, 612.20, 910.12, 910.13, 910.17, 611.10, 631.10, 910.15, 910.11, 612.34, 632.34, 633.34, 910.14, 632.50, 633.50, 910.18, 910.16, 910.10, 611.13, PG81, PG91, 111.12.040
- Härteprüfung an Schutzrohren zum Nachweis der NACE-Härtewerte
TW10, TW20, TW25, TW30, TW31, TW10-P, TW10-B, TW10-S
- Dateiformate für Kundenlogos auf Zifferblättern
TG53, 732.31, 733.31, 732.51, 733.51, 216.06.050, 216.40.050, PG43SA-S, 232.30, 233.30, TGS73, TGS55, THM10, GDI-100, GDI-063, PG23CP, PG23LT, 632.51, PGW23.100, PGW26.100, PG28, PG43SA-D, A43, 532.53+8xx, 532.52, 532.53, 532.54, GDM-RC-100, GDM-100-TI-D, A52, R52, A50, A48, A46, 432.36+8xx, 432.56+8xx, 432.56, 432.36, PG23HP-S, PG23HP-P, 111.10, 111.12, STW15, DPGS40TA, 100.0x, 100.1x, PGT10 USB, GDM-063, 432.50, 433.50, 422.12, 423.12, 342.11, 332.50, 333.50, DPGT40, DPS40, DPGS40, DPG40, 70-8xx, 101.00, 101.12, 73, 112.28, 132.28, 111.11, 111.31, GDM-100-TI, GDM-100-TA, GDM-100, TGT73, 332.30, 333.30, PGS23.100, PGS23.160, 232.50, 233.50, 312.20, 232.36, 233.36, 232.34, 233.34, PGS23.063, PGT21, PGS21, 230.15-851, 230.15, 213.40, 712.15.100, 732.15.100, 732.18, 733.18, 213.53, 113.53, PGS21.100, PGS21.160, PG43SA-C, PGS25, MFT, 212.20, 131.11, 130.15, PGT43.100, PGT43.160, PGT23.100, PGT23.160, IFC, TC53, 113.13, PGT63HP.100, PGT63HP.160, PGT43HP.100, PGT43HP.160, 111.16, 111.26, PG21BP-1, PG21BP-2, PG21DPB, PGT02, PGT23.063, APGT43.100, APGT43.160, PGT01, DPGT43HP.100, DPGT43HP.160, DPGT43.100, DPGT43.160, 736.51, 732.14, 762.14, 75, 74, 716.05, 712.15.160, 732.15.160, 711.12, 713.12, 731.12, 733.02, 632.51+8xx, 716.11, 736.11, DPGS43.100, DPGS43.160, 700.01, 700.02, 70, TGT70, TG54
- Einschweißen von WIKA-Muffen und -Einschweißkugeln in der sterilen Verfahrenstechnik
TR22-A, TR21-A, TR21-C, TW22
- Funktionale Sicherheit: Sicherheitsrelevante Temperaturmessung nach IEC 61508, Version 2.2.3 (aktuelle Version - gültig ab 01.08.2014)
CPT-20, CPT-21, DIH50, DIH52, TC10-0, TR10-0, magWIK, TIF50, TIF52, DIH10, DIH10-Ex, T32.xS, T38
- Verschleißfeste Beschichtungen von Schutzrohren
TW10, TW20, TW25, TW30, TW31, TW10-P, TW10-B, TW10-S
- Seriennummern auf WIKA-Geräten
TR36
- Schaltkontakte für Zeigergeräte
PGS23.063, 700.01, 700.02, 712.15.100, 732.15.100, 712.15.160, 732.15.160, 736.51, DPGS43.100, DPGS43.160, 632.50, 633.50, 711.12, 713.12, 731.12, 733.02, PGS23.100, PGS23.160, 532.53+8xx, DPGT43HP.100, DPGT43HP.160, DPGS43HP.100, DPGS43HP.160, PGS43.100, PGS43.160, PGT63HP.100, PGT63HP.160, PGT43HP.100, PGT43HP.160, PGT43.100, PGT43.160, 632.51+8xx, 230.15-851, TGS73, 422.12, 423.12, 432.36+8xx, 432.56+8xx, PGS21.100, PGS21.160, 70-8xx, DPGT43.100, DPGT43.160, TGS55
- Anzeigebereiche von Thermometern, Teilstrichabstand und Bezifferung der Skale nach EN 13190
A50, 70, TG58SA, 73, TGS55, A43, TG53, 70-8xx, A48, TGS73, TG54, 55, A52, R52, A46, 74, 75, TGT70, TGT73
- Elektrische Montage von Drucksensoren und elektronischen Druckschaltern
MH-4-CAN, PSD-4
